Air Turner Bar Systems are
designed and manufactured to suit customers' particular
application. There are six sizes for 90° entry or 180°
turnover, with web widths ranging from 100mm to 3 meters, for
horizontal or vertical mounting.
The units are built as
freestanding or bolt-on modules, complete with leveling braces
and bolting down holes. They are designed to suit existing
machine and site conditions.
The framework is
rectangular hollow section with specialized corner bracing
incorporating the fine adjustment mechanism and mounting for
the Turner Bars.
are tubular steel with bell mouth air holes, ground, polished
and hard chrome plated. Air blow creates an air film assist to
By choosing appropriate
mounting positions, a variety of configurations can be
obtained to enable a choice of entry and exit requirements.
rollers are normally aluminum, statically or dynamically
Air for flotation requires
5 CFM per 100mm web width at 10ins to 18ins W.G. depending on
direct mounted on each Turner Bar can be supplied at the time
of manufacture (option). For narrow web widths and special
applications air flotation holes can be reduced for using
compressed air or arranged as required.